BRAKE MASTER CYLINDER (w/ VSC) > REMOVAL

1. PRECAUTION

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE ENGINE ROOM SIDE COVER LH

4. REMOVE ENGINE ROOM SIDE COVER RH

5. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH

6. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

9. REMOVE FRONT FENDER TO COWL SIDE SEAL LH

10. REMOVE FRONT FENDER TO COWL SIDE SEAL RH

11. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

12. DRAIN BRAKE FLUID

13. REMOVE FRONT WHEEL

14. REMOVE ENGINE ROOM RELAY NO.3 BLOCK

15. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY