BRAKE ACTUATOR (w/ VSC) > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE ENGINE ROOM SIDE COVER RH

4. REMOVE ENGINE ROOM SIDE COVER LH

5. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH

6. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

9. REMOVE FRONT FENDER TO COWL SIDE SEAL LH

10. REMOVE FRONT FENDER TO COWL SIDE SEAL RH

11. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

12. SEPARATE ENGINE ROOM RELAY NO.3 BLOCK

13. REMOVE FRONT WHEEL

14. DRAIN BRAKE FLUID

15. REMOVE BRAKE MASTER WITH PLATE CYLINDER SUB-ASSEMBLY

16. REMOVE ABS AND TRACTION ACTUATOR ASSEMBLY WITH BRACKET