Lexus IS250 · Service Manual TRANSMISSION

REMOVAL

Removal / installation


1. REMOVE MANUAL TRANSMISSION ASSEMBLY
(Click here)

2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

  1. C125907E01
    Remove the clutch release fork sub-assembly from the transmission unit.

  1. D033846E01
    Remove the E-ring, pin and wave washer from the clutch release fork.


3. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:
Keep the lining part of the clutch disc assembly, the pressure plate and surface of the flywheel sub-assembly away from oil and foreign matter.


4. REMOVE CLUTCH COVER ASSEMBLY

5. REMOVE CLUTCH RELEASE BEARING SHAFT SNAP RING

  1. C123487
    Using a snap ring expander, remove the clutch release bearing shaft snap ring.

  1. C125933E01
    Remove the clutch release bearing hub, release bearing wave washer and release bearing plate washer.


6. REMOVE CLUTCH RELEASE HUB SNAP RING

  1. C125937
    Using a snap ring expander, remove the clutch release hub snap ring.

  1. C125934E01
    Remove the clutch release hub ball bearing, thrust cone spring plate washer and thrust cone spring.


7. REMOVE RELEASE FORK SUPPORT

  1. C125919E01
    Remove the 2 bolts and release fork support from the transmission unit.

  1. Remove the release fork support spring from the release fork support.

← COMPONENTSINSPECTION →