Lexus IS250 · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation


1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

  1. C120573
    Install the shift lock control ECU sub-assembly with the 2 screws.


2. INSTALL TRANSMISSION CONTROL SWITCH

  1. C122510E01
    Install the shift lever with the pin and shift lever nut.

  1. C122509E01
    Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.

  1. C122506
    Install the transmission control switch to the shift lever guide housing.

    NOTICE:
    Securely engage the claws.

  1. C122505
    Install the shift lever guide housing with the shift lever lock pin and a new shift lever nut.

    NOTICE:
    1. Install the shift lever nut and lock pin after first engaging the 2 claws.
    2. Securely engage the claws.

  1. C122504
    Connect the transmission control switch connector to the floor shift assembly.


3. INSTALL SHIFT POSITION INDICATOR

  1. C120572
    Install the shift position indicator to the console panel upper with the 4 screws.

← ADJUSTMENTINSTALLATION →