SYSTEM DESCRIPTION

Troubleshooting

FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION

The driver seat and front passenger seat are equipped with slide, reclining, lifter, front vertical, and lumbar support adjustment functions.
The memory system for the front seats is optional. With the memory function, the front power seat switch (position control ECU) performs the following: 1) controls the slide, reclining, lifter, and front vertical motors; 2) memorizes the seat position; and 3) operates the seat restoring operation.
The memory call function uses the key ID code of the electrical key to memorize and reproduce the appropriate driving position for each individual who possesses an electrical key.

FUNCTION OF MAIN COMPONENT

The following functions are available:

Components	Function
Power seat motor assembly (slide motor)	Activated based on a signal from the position control ECU and slides the seat forward and rearward.
Power seat motor assembly (reclining motor)	Activated based on a signal from the position control ECU and tilts and reclines the seat.
Power seat motor assembly (front vertical motor)	Activated based on a signal from the position control ECU and raises and lowers the seat cushion front vertically.
Power seat motor assembly (lifter motor)	Activated based on a signal from the position control ECU and raises and lowers the seat cushion vertically.
Lumbar support adjuster motor	Activated based on a signal from the lumbar front power seat switch and adjusts lumbar support.
Front power seat switch (reclining, lifter, slide, front vertical)	Based on switches operated, seat adjuster signals are input in the position control ECU and the seat is adjusted accordingly.
Lumbar front power seat switch	Based on switches operated, the seat is adjusted accordingly.
Seat memory switch LH (driver side) (SET switch, memory switch)	When the SET switch and M1, M2, or M3 switch are pressed simultaneously, a signal is input to the outer mirror control ECU LH and sent to the position control ECU, which records the seat position, steering wheel position (tilt & telescopic), and outer mirror position (RH and LH). When the M1, M2, or M3 switch is pressed, a signal is input to the outer mirror control ECU LH and sent to the position control ECU, which changes the seat position, steering wheel position (tilt & telescopic), and outer mirror position (RH and LH) to each recorded position.
Seat memory switch RH (passenger side) (SET switch, memory switch)	When the SET switch and M1, M2, or M3 switch are pressed simultaneously, a signal is input to the outer mirror control ECU RH and sent to the position control ECU, which records the seat position. When the M1, M2, or M3 switch is pressed, a signal is input to the outer mirror control ECU RH and sent to the position control ECU, which changes the seat position to the recorded position.

SYSTEM OPERATION

The front power seat adjustment and position memory are shown in the chart below.

Seat Adjustment Function	Driver	Passenger
Fore-and-Aft Slide	Power and memory	Power and memory
Reclining	Power and memory	Power and memory
Front Vertical Height	Power and memory	Power and memory
Lifter	Power and memory	Power and memory
Lumbar Support	Power	Power
Headrest Fore-and-Aft	Slide-linked	Manual

For the driver side memory function, the memory switch operation is first transferred from the outer mirror control ECU LH to the front power seat switch LH (position control ECU) via the multiplex communication line. For the passenger side memory function, memory switch operation is first transferred from the outer mirror control ECU RH to the front power seat switch RH (position control ECU) via the multiplex communication line. Then, either the seat position is stored in memory or a previously stored seat position is recalled.