Lexus IS250 · Service Manual BODY

REMOVAL

Removal / installation

HINT:
Use the same procedures for the LH side and RH side.


1. REMOVE FRONT SEAT HEADREST ASSEMBLY

2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER

  1. Operate the power seat switch knob and move the seat to the rearmost position.

  1. B126076
    Using a screwdriver, detach the 2 claws and remove the seat track bracket cover outer front LH.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER

4. REMOVE REAR OUTER SEAT TRACK COVER

  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B126077
    Using a screwdriver, detach the 2 claws and remove the front seat track cover rear outer LH.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE REAR INNER SEAT TRACK COVER

6. REMOVE FRONT SEAT ASSEMBLY

  1. Operate the power seat switch knob and move the seat to the rearmost position.

  1. B128141
    Remove the 2 bolts on the front seat track bracket.

  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B128146
    Remove the 2 bolts on the rear seat track bracket.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).

  1. Disconnect the connectors under the seat. Then remove the seat.

← COMPONENTSDISASSEMBLY →