Lexus IS250 · Service Manual ENGINE

REMOVAL

Removal / installation


1. REMOVE COOL AIR INTAKE DUCT SEAL

  1. A127530
    Remove the 11 clips and intake duct seal.


2. REMOVE ENGINE ROOM SIDE COVER LH

  1. A123702E01
    Remove the 5 clips and side cover.


3. REMOVE INTEGRATION RELAY

  1. Remove the No. 2 relay block cover.

  1. A105813
    Using a screwdriver, detach the 2 claws and disconnect the integration relay from the No. 2 relay block.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the 3 connectors.

← COMPONENTSINSPECTION →