INSPECTION

Inspection

INSPECT FRONT POWER SEAT SWITCH LH

1. Measure the resistance between the specified terminals when each switch is operated.
   

   Standard resistance (Slide switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 9 (SLDF)	FRONT	Below 1 Ω
   4 (E) - 6 (SLDR)	FRONT	Below 1 Ω
   1 (B) - 6 (SLDR)	FRONT	10 kΩ or higher
   4 (E) - 9 (SLDF)	FRONT	10 kΩ or higher
   4 (E) - 6 (SLDR)	OFF	Below 1 Ω
   4 (E) - 9 (SLDF)	OFF	Below 1 Ω
   1 (B) - 6 (SLDR)	OFF	10 kΩ or higher
   1 (B) - 9 (SLDF)	OFF	10 kΩ or higher
   1 (B) - 6 (SLDR)	REAR	Below 1 Ω
   4 (E) - 9 (SLDF)	REAR	Below 1 Ω
   1 (B) - 9 (SLDF)	REAR	10 kΩ or higher
   4 (E) - 6 (SLDR)	REAR	10 kΩ or higher

   Standard resistance (Front vertical switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 10 (FUP)	UP	Below 1 Ω
   4 (E) - 5 (FDWN)	UP	Below 1 Ω
   1 (B) - 5 (FDWN)	UP	10 kΩ or higher
   4 (E) - 10 (FUP)	UP	10 kΩ or higher
   4 (E) - 5 (FDWN)	OFF	Below 1 Ω
   4 (E) - 10 (FUP)	OFF	Below 1 Ω
   1 (B) - 5 (FDWN)	OFF	10 kΩ or higher
   1 (B) - 10 (FUP)	OFF	10 kΩ or higher
   1 (B) - 5 (FDWN)	DOWN	Below 1 Ω
   4 (E) - 10 (FUP)	DOWN	Below 1 Ω
   1 (B) - 10 (FUP)	DOWN	10 kΩ or higher
   4 (E) - 5 (FDWN)	DOWN	10 kΩ or higher

   Standard resistance (Lifter switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 7 (LUP)	UP	Below 1 Ω
   4 (E) - 8 (LDWN)	UP	Below 1 Ω
   1 (B) - 8 (LDWN)	UP	10 kΩ or higher
   4 (E) - 7 (LUP)	UP	10 kΩ or higher
   4 (E) - 7 (LUP)	OFF	Below 1 Ω
   4 (E) - 8 (LDWN)	OFF	Below 1 Ω
   1 (B) - 7 (LUP)	OFF	10 kΩ or higher
   1 (B) - 8 (LDWN)	OFF	10 kΩ or higher
   1 (B) - 8 (LDWN)	DOWN	Below 1 Ω
   4 (E) - 7 (LUP)	DOWN	Below 1 Ω
   1 (B) - 7 (LUP)	DOWN	10 kΩ or higher
   4 (E) - 8 (LDWN)	DOWN	10 kΩ or higher

   Standard resistance (Reclining switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 3 (RCLF)	FRONT	Below 1 Ω
   4 (E) - 2 (RCLR)	FRONT	Below 1 Ω
   1 (B) - 2 (RCLR)	FRONT	10 kΩ or higher
   4 (E) -3 (RCLF)	FRONT	10 kΩ or higher
   4 (E) - 2 (RCLR)	OFF	Below 1 Ω
   4 (E) - 3 (RCLF)	OFF	Below 1 Ω
   1 (B) - 3 (RCLF)	OFF	10 kΩ or higher
   1 (B) - 2 (RCLR)	OFF	10 kΩ or higher
   1 (B) - 2 (RCLR)	REAR	Below 1 Ω
   4 (E) - 3 (RCLF)	REAR	Below 1 Ω
   1 (B) - 3 (RCLF)	REAR	10 kΩ or higher
   4 (E) - 2 (RCLR)	REAR	10 kΩ or higher

   If the result is not as specified, replace switch.
   

INSPECT FRONT POWER SEAT SWITCH RH

1. Measure the resistance between the specified terminals when each switch is operated.
   

   Standard resistance (Slide switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 9 (SLDF)	FRONT	Below 1 Ω
   4 (E) - 6 (SLDR)	FRONT	Below 1 Ω
   1 (B) - 6 (SLDR)	FRONT	10 kΩ or higher
   4 (E) - 9 (SLDF)	FRONT	10 kΩ or higher
   4 (E) - 6 (SLDR)	OFF	Below 1 Ω
   4 (E) - 9 (SLDF)	OFF	Below 1 Ω
   1 (B) - 6 (SLDR)	OFF	10 kΩ or higher
   1 (B) - 9 (SLDF)	OFF	10 kΩ or higher
   1 (B) - 6 (SLDR)	REAR	Below 1 Ω
   4 (E) - 9 (SLDF)	REAR	Below 1 Ω
   1 (B) - 9 (SLDF)	REAR	10 kΩ or higher
   4 (E) - 6 (SLDR)	REAR	10 kΩ or higher

   Standard resistance (Front vertical switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 10 (FUP)	UP	Below 1 Ω
   4 (E) - 5 (FDWN)	UP	Below 1 Ω
   1 (B) - 5 (FDWN)	UP	10 kΩ or higher
   4 (E) - 10 (FUP)	UP	10 kΩ or higher
   4 (E) - 5 (FDWN)	OFF	Below 1 Ω
   4 (E) - 10 (FUP)	OFF	Below 1 Ω
   1 (B) - 5 (FDWN)	OFF	10 kΩ or higher
   1 (B) - 10 (FUP)	OFF	10 kΩ or higher
   1 (B) - 5 (FDWN)	DOWN	Below 1 Ω
   4 (E) - 10 (FUP)	DOWN	Below 1 Ω
   1 (B) - 10 (FUP)	DOWN	10 kΩ or higher
   4 (E) - 5 (FDWN)	DOWN	10 kΩ or higher

   Standard resistance (Lifter switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 7 (LUP)	UP	Below 1 Ω
   4 (E) - 8 (LDWN)	UP	Below 1 Ω
   1 (B) - 8 (LDWN)	UP	10 kΩ or higher
   4 (E) - 7 (LUP)	UP	10 kΩ or higher
   4 (E) - 7 (LUP)	OFF	Below 1 Ω
   4 (E) - 8 (LDWN)	OFF	Below 1 Ω
   1 (B) - 7 (LUP)	OFF	10 kΩ or higher
   1 (B) - 8 (LDWN)	OFF	10 kΩ or higher
   1 (B) - 8 (LDWN)	DOWN	Below 1 Ω
   4 (E) - 7 (LUP)	DOWN	Below 1 Ω
   1 (B) - 7 (LUP)	DOWN	10 kΩ or higher
   4 (E) - 8 (LDWN)	DOWN	10 kΩ or higher

   Standard resistance (Reclining switch):

   Tester Connection	Switch Condition	Specified Condition
   1 (B) - 3 (RCLF)	FRONT	Below 1 Ω
   4 (E) - 2 (RCLR)	FRONT	Below 1 Ω
   1 (B) - 2 (RCLR)	FRONT	10 kΩ or higher
   4 (E) -3 (RCLF)	FRONT	10 kΩ or higher
   4 (E) - 2 (RCLR)	OFF	Below 1 Ω
   4 (E) - 3 (RCLF)	OFF	Below 1 Ω
   1 (B) - 3 (RCLF)	OFF	10 kΩ or higher
   1 (B) - 2 (RCLR)	OFF	10 kΩ or higher
   1 (B) - 2 (RCLR)	REAR	Below 1 Ω
   4 (E) - 3 (RCLF)	REAR	Below 1 Ω
   1 (B) - 3 (RCLF)	REAR	10 kΩ or higher
   4 (E) - 2 (RCLR)	REAR	10 kΩ or higher

   If the result is not as specified, replace switch.