Lexus IS250 · Service Manual BODY

REMOVAL

Removal / installation


1. REMOVE RECLINING POWER SEAT SWITCH KNOB

  1. B123738
    Using a screwdriver, detach the knob.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B123739
    Using a screwdriver, detach the knob.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE FRONT SEAT CUSHION SHIELD WITH INNER NO. 1 CUSHION SHIELD

  1. B123740
    Release the 2 rubber bands of the front seatback board from the front seat frame.

  1. B123741
    Remove the 6 screws.

  1. Disengage the claw and separate the front seat cushion shield assembly.

  1. Disconnect the connector from the front power seat lumbar switch.


4. REMOVE FRONT POWER SEAT SWITCH (w/ Seat Position Memory System)

  1. B123747
    Remove the 3 screws.

  1. Disconnect the 2 connectors and remove the switch.


5. REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)

  1. Remove the 3 screws.

  1. Disconnect the connector and remove the switch.

← COMPONENTSINSPECTION →