ON-VEHICLE INSPECTION
Inspection
| INSPECT HOOD SUB-ASSEMBLY |
Check that the clearance measurements of areas A to D are within each standard range.
- Standard clearance:
Area
Measurement
A
2.2 to 5.2 mm (0.087 to 0.205 in.)
B
-0.6 to 2.4 mm (-0.024 to 0.095 in.)
C
2.2 to 5.2 mm (0.087 to 0.205 in.)
D
-1.3 to 1.7 mm (-0.051 to 0.067 in.)