Lexus IS250 · Service Manual ENGINE

INSTALLATION

Removal / installation


1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

  1. A120000
    Install the sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the sensor connector.


2. INSTALL VVT SENSOR (for Intake Side of Bank 2)

  1. A120001
    Install the sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the sensor connector.


3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

  1. A119999
    Install the sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the sensor connector.


4. INSTALL VVT SENSOR (for Intake Side of Bank 1)

  1. A119998
    Install the sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the sensor connector.


5. INSTALL V-BANK COVER SUB-ASSEMBLY

  1. A127528
    Engage the 2 clips on the front of the cover, and then engage the clip on the rear to install the V-bank cover.

    NOTICE:
    1. Be sure to engage the clips securely.
    2. Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.

← REMOVALCOMPONENTS →