Lexus IS250 · Service Manual BODY

ON-VEHICLE INSPECTION

Inspection


CHECK POWER MIRROR SWITCH OPERATION

  1. Remote control
    The mirror adjust switch can control the adjustment axis of the mirror surface.

  1. Reverse-linked
    This function tilts the mirror surface downward to improve the visibility when driving in reverse, provided that all the conditions given below have been met.

    1. Engine switch is on (IG).
    2. Shift lever is moved to "R".


CHECK MEMORY SWITCH OPERATION

  1. Memory
    Memorizes the positions when all conditions below have been met and the 1, 2 or 3 button is pushed while the "SET" button is pushed.

    1. Engine switch is on (IG).
    2. Shift position is "P" (A/T models).
    3. Vehicle speed is 3 km (1.9 mph) or less (M/T models).
    4. Parking brake lever is pulled (M/T models).
    When the memory setting is completed, the buzzer will sound for 0.5 seconds.

  1. Recall
    If the button 1, 2 or 3 is pressed when all conditions below have been met, it recalls the positions.

    1. Engine switch is on (IG).
    2. Shift position is "P" (A/T models).
    3. Vehicle speed is 3 km (1.9 mph) or less (M/T models).
    4. Parking brake lever is pulled (M/T models).
    If the button 1, 2 or 3 is pressed when all conditions have been met and within 30 seconds, it recalls the positions.
    1. Engine switch on (IG).
    2. Driver door is opened.

← DATA LIST / ACTIVE TESTPower Mirror cannot be Adjusted with Power Mirror Switch →