Cellular Phone Registration Failure, Phone Directory Transfer Failure

INSPECTION PROCEDURE

1. CHECK CONDITION

1. Proceed to the next step according to the table below.
   

   RESULT:

   Conditions	Proceed To
   Another Bluetooth compatible cellular phone is present.	A
   Another Bluetooth compatible vehicle is present.	B
   None of the above	C

B	Go to step 3
C	Go to step 4

A

2. CHECK USING ANOTHER CELLULAR PHONE

1. Check if the system functions using another Bluetooth compatible cellular phone.

   HINT:

   1. Confirm that either the same or a different version of another Bluetooth compatible cellular phone complies with the system.
      
   2. Depending on the version, some Bluetooth compatible cellular phones cannot be used.
      

   OK:

   The system functions.
   

NG	REPLACE MULTI-DISPLAY

OK
USE A BLUETOOTH COMPATIBLE CELLULAR PHONE

3. CHECK USING ANOTHER BLUETOOTH COMPATIBLE VEHICLE

1. Register the cellular phone with another vehicle and check if the system functions normally.

   HINT:

   Depending on the version, some Bluetooth compatible cellular phones cannot be used.

   OK:

   The system functions.
   

OK	REPLACE MULTI-DISPLAY

NG
USE A BLUETOOTH COMPATIBLE CELLULAR PHONE

4. CHECK CELLULAR PHONE

1. Check if the cellular phone is Bluetooth compatible.

   HINT:

   Some versions of Bluetooth compatible cellular phones may not function.

   OK:

   The phone is Bluetooth compatible.
   

NG	USE A BLUETOOTH COMPATIBLE CELLULAR PHONE

OK

5. CHECK CELLULAR PHONE

1. Check if a call can be made from the cellular phone.

   HINT:

   When the battery is low, registration or directory transfer cannot be done.

   OK:

   A call can be made from the cellular phone.
   

NG	REPAIR OR REPLACE CELLULAR PHONE

OK
REPLACE MULTI-DISPLAY