INSPECTION
Inspection
| INSPECT OUTER MIRROR SWITCH (w/o Seat Position Memory System) |
Inspect the outer mirror switch.
Measure the resistance according to the value(s) in the table below when the switch is operated.
- Resistance:
- Select "L" on the left/right adjustment switch:
Tester Connection
Switch Position
Specified Condition
4 - 8
UP
Below 1 Ω
6 - 7
4 - 7
DOWN
6 - 8
5 - 8
LEFT
6 - 7
5 - 7
RIGHT
6 - 8
- Select "R" on the left/right adjustment switch:
Tester Connection
Switch Position
Specified Condition
3 - 8
UP
Below 1 Ω
6 - 7
3 - 7
DOWN
6 - 8
2 - 8
LEFT
6 - 7
2 - 7
RIGHT
6 - 8
Inspect retract switch.
Measure the resistance according to the value(s) in the table below when the switch is operated.
Tester Connection
Switch Position
Specified Condition
7 - 9
8 - 10
Retracts
Below 1 Ω
7 - 10
8 - 9
Returns (Driving position)
| INSPECT OUTER MIRROR SWITCH (w/ Seat Position Memory System) |
Inspect the outer mirror switch.
Measure the resistance according to the value(s) in the table below when the switch is operated.
- Resistance:
Tester Connection
Switch Position
Specified Condition
2 - 3
OFF
10 kΩ or higher
UP
225 to 275 Ω
DOWN
437 to 503 Ω
LEFT
744 to 856 Ω
RIGHT
437 to 503 Ω
1 - 2
L
90 to 110 Ω
R
10 Ω or less
4 - 7
6 - 8
Retracts
Below 1 Ω
4 - 8
6 - 7
Returns (Driving position)
Below 1 Ω