Lexus IS250 · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information


Clock Assembly (without Navigation System)
E110596E05
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
ILL+ (J54-3) - Body ground
G - Body ground
Illumination Signal
Combination switch OFF
Below 1 V
Combination switch Head
10 to 14 V
IG+ (J54-4) - Body ground
B - Body ground
Ignition Switch Signal
Engine switch off
Below 1 V
Engine switch on (IG)
10 to 14 V
ACC (J54-5) - Body ground
O - Body ground
Ignition Switch Signal
Engine switch off
Below 1 V
Engine switch on (IG)
10 to 14 V
E (J54-8) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
ILL-(J54-10) - Body ground
LG - Body ground
Illumination Signal
Engine switch on (IG), combination switch Head, and light control rheostat position MAX.
Pulse generation
(See waveform)
B (J54-14) - Body ground
LG - Body ground
Battery
Always
10 to 14 V

  1. I043790E02
    Waveform (Reference) : Using an oscilloscope:
    OK: 
    Item
    Condition
    Tool setting
    5 V/DIV., 200 ms./DIV.
    Vehicle condition
    Engine switch on (IG), light control rheostat is in the MID. position.


Clock Assembly (with Navigation System)
B120679E03
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
E (J53-2) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
ILL+ (J53-4) - Body ground
G - Body ground
Illumination Signal
Combination switch OFF
Below 1 V
Combination switch Head
10 to 14 V
ACC (J53-5) - Body ground
W-B - Body ground
Ignition Switch Signal
Engine switch off
Below 1 V
Engine switch on (IG)
10 to 14 V
+B (J53-6) - Body ground
BR - Body ground
Battery
Always
10 to 14 V
ILL-(J53-10) - Body ground
W - Body ground
Illumination Signal
Engine switch on (IG), combination switch Head, and light control rheostat position MAX.
Pulse generation
(See waveform)
IG (J53-11) - Body ground
B - Body ground
Ignition Switch Signal
Engine switch off
Below 1 V
Engine switch on (IG)
10 to 14 V

  1. I043790E02
    Waveform (Reference) : Using an oscilloscope:
    OK: 
    Item
    Condition
    Tool setting
    5 V/DIV., 200 ms./DIV.
    Vehicle condition
    Engine switch on (IG), light control rheostat is in the MID. position.

← PROBLEM SYMPTOMS TABLEON-VEHICLE INSPECTION →