58-40

DESCRIPTION

DTC No.	DTC Detection Condition	Trouble Area
58-40	GPS antenna error	Wire harness GPS antenna Navigation ECU
58-41	Error of the power source to the GPS antenna
80-40	GPS antenna error
80-41	Error of the power source to the GPS antenna

INSPECTION PROCEDURE

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK HARNESS AND CONNECTOR (GPS ANTENNA - NAVIGATION ECU)

1. Check that the GPS antenna cord is securely connected to the navigation ECU connector.

   OK:

   The cord is securely connected.
   

NG	REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

2. REPLACE GPS ANTENNA

1. Replace the GPS antenna with a normal one and check if the same problem occurs again.

   1. Clear the DTCs (Click here).

   2. Recheck for DTCs and check if the same trouble occurs again.

      OK:

      Same problem does not occur.
      

NG	REPLACE NAVIGATION ECU

OK
END