58-42
Diagnostic trouble codes
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 58-42 |
|
|
| 80-42 |
|
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
| 1. CHECK MAP DISC |
Check that the map disc is not deformed or cracked.

- OK:
- No deformations or cracks on the map disc.
|
|
||||
| OK | |
| 2. CLEAN DISC |
Disc cleaning

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
| NEXT | |
| 3. RECHECK DTC |
Clear the DTCs (Click here).
Recheck for DTCs and check if the same trouble occurs again.
- OK:
- Same problem does not occur.
|
|
||||
| NG | |
| 4. REPLACE MAP DISC |
Replace the map disc.
Clear the DTCs and recheck for DTCs.
Check if the same trouble occurs again.
- OK:
- Same problem does not occur.
|
|
||||
| NG | ||
| ||
