DISASSEMBLY
Removal / installation
| 1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP |
Disengage the 3 claws and disconnect the cover.
Remove the 2 screws and luggage compartment door assist grip.
| 2. REMOVE LUGGAGE COMPARTMENT DOOR COVER |
Using a clip remover, remove the 12 clips and luggage compartment door cover.
| 3. REMOVE LUGGAGE COMPARTMENT DOOR REINFORCEMENT |
Using a clip remover, remove the clip.
Remove the 2 nuts and luggage compartment door reinforcement.
| 4. REMOVE LUGGAGE KEY ELECTRICAL SWITCH |
Disconnect the connector.
Remove the nut and luggage key electrical switch.
| 5. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY |
Disconnect the connector and clamp.
Remove the nut.
Disconnect the luggage compartment door lock control cable and remove the luggage compartment door lock cylinder assembly.
| 6. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY |
Disconnect the connector.
Disengage the clamp.
Remove the 2 bolts and luggage compartment door lock assembly.
| 7. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System) |
Disengage the camera connector clamp.
Disconnect the television camera connector.
Remove the 2 screws.
Disengage the 2 claws to remove the television camera assembly as shown in the illustration.
| 8. REMOVE REAR LIGHT ASSEMBLY LH |
Disconnect the connector.
Remove the 3 nuts and rear light assembly.
| 9. REMOVE REAR LIGHT ASSEMBLY RH |
| 10. REMOVE LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY |
Remove the 3 nuts.
Disengage the 5 clips and remove the luggage compartment outside door garnish sub-assembly.
| 11. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH |
Disconnect the connector.
Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.
| 12. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH |