Lexus IS250 · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation


1. REMOVE MAGNETIC CLUTCH ASSEMBLY

  1. E075074
    Place the compressor and magnetic clutch in a vise.

  1. Using vise pliers, hold the magnetic clutch hub.

  1. Remove the bolt, magnetic clutch hub and magnetic clutch washers.

    HINT:
    There is no set number of magnetic clutch washers since they are used for adjusting.

  1. E037091
    Using a snap ring expander, remove the snap ring and magnetic clutch rotor.

    NOTICE:
    Take care not to damage the seal cover of the bearing when removing the snap ring.

  1. Disconnect the connector.

  1. Remove the screw.

  1. I030400
    Using a snap ring expander, remove the snap ring and magnetic clutch stator.

← REMOVALINSPECTION →