Lexus IS250 · Service Manual BODY ELECTRICAL

INSPECTION

Inspection


INSPECT ENTRY LOCK AND UNLOCK SWITCH

  1. B112465E05
    Remove the outside handle.

  1. Disconnect the connectors.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection (Symbols)
    		 Condition
    		 Specified Condition
    e1-1 (TRG-) - e1-3 (TRG+)
    		 Lock switch not pushed
    		 10 kΩ or higher
    Lock switch pushed
    		 Below 1 Ω
    n1-1 (TRG-) - n1-3 (TRG+)
    		 Lock switch not pushed
    		 10 kΩ or higher
    Lock switch pushed
    		 Below 1 Ω

← REMOVALINSTALLATION →