Lexus IS250 · Service Manual BODY

DISASSEMBLY

Removal / installation


1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System)

  1. Disconnect the sensor connector.

  1. E075062
    Remove the sensor retainer as shown in the illustration.

  1. Remove the No. 1 ultrasonic sensor from the rear bumper.


2. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Clearance Sonar System)

  1. Disconnect the sensor connector.

  1. E125308
    Remove the sensor retainer as shown in the illustration.

  1. Remove the No. 2 ultrasonic sensor from the rear bumper.


3. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Clearance Sonar System)

4. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ Clearance Sonar System)

5. REMOVE REAR BUMPER PIECE LH

  1. B125548
    Disengage the 2 claws and remove the rear bumper piece LH.


6. REMOVE REAR BUMPER PIECE RH

7. REMOVE REFLEX REFLECTOR ASSEMBLY LH

  1. B125549
    Remove the screw.

  1. Disengage the claw and remove the reflex reflector assembly LH.


8. REMOVE REFLEX REFLECTOR ASSEMBLY RH

9. REMOVE REAR BUMPER PROTECTOR LH

  1. Remove the rear bumper protector LH.


10. REMOVE REAR BUMPER PROTECTOR RH

11. REMOVE REAR BUMPER COVER

12. REMOVE REAR BUMPER ENERGY ABSORBER

  1. B125613
    Remove the rear bumper energy absorber.


13. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

  1. B125614
    Remove the 8 bolts.

  1. Disengage the 2 claws and remove the rear bumper reinforcement sub-assembly.

  1. Remove the grommet.


14. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT LH

  1. B125554
    Remove the 2 screws, clip and No. 1 rear bumper side support LH.


15. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT RH

16. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH

  1. B125555
    Remove the 2 screws and No. 2 rear bumper side support LH.


17. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH

18. REMOVE UPPER REAR BUMPER RETAINER LH

  1. B125556
    Remove the 2 screws and upper rear bumper retainer LH.


19. REMOVE UPPER REAR BUMPER RETAINER RH
← REMOVALREASSEMBLY →