Lexus IS250 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL REAR SPEAKER ASSEMBLY

  1. E119000
    Engage the 2 claws as shown in the illustration to temporarily install the rear speaker assembly.

  1. E118999E01
    Install the rear speaker assembly with the 3 bolts.

    HINT:
    Install the bolts in the order shown in the illustration.

  1. Connect the connector.


2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY

  1. E119004E01
    Engage the 3 claws and install the rear No. 2 speaker assembly.

  1. Engage the speaker connector clamp.


3. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (w/o Front Center Speaker)

  1. E119002E01
    Install the rear No. 3 speaker assembly with the 2 bolts.

    HINT:
    Install the bolts in the order shown in the illustration.

  1. Connect the connector.


4. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP

  1. B124541
    Engage the 3 claws to install the rear door inner glass weatherstrip.


5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

  1. B124544
    Connect the rear door lock remote control cable and rear door inside locking cable to the rear inside handle.

  1. Connect each connector.

  1. B124504
    Engage the rear door trim board with the 3 clips of the rear door inner glass weatherstrip.

  1. B124503
    Engage the 8 clips to install the rear door trim board to the rear door panel.

  1. Install the 2 screws.


6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY

  1. Connect the connector.

  1. B124542
    Engage the 2 claws and 2 clips, and install the rear power window regulator switch assembly.


7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

  1. B124543
    Engage the 3 claws to install the rear door inside handle bezel plug.

← REMOVALCOMPONENTS →