REMOVAL
Removal / installation
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).
| 2. REMOVE ROOF HEADLINING ASSEMBLY |
- HINT:
- Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY".
| 3. REMOVE AMPLIFIER ANTENNA ASSEMBLY |
Disconnect the connector.
Disengage the clamp and remove the 2 nuts.
Disengage the clip and remove the amplifier antenna assembly.
- NOTICE:
- If reusing the removed amplifier antenna assembly, do not touch the contact terminals.