Lexus IS250 · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)

  1. Using a screwdriver, disengage the 3 claws and open the cover.

    B129832

  1. Remove the 2 screws.

  1. Using a moulding remover, disengage the 2 clips.

  1. Disconnect the connector. Remove the map light assembly.


2. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)

  1. Using a screwdriver, disengage the 3 claws and open the cover.

    B129829

  1. Remove the 2 screws.

  1. Using a moulding remover, disengage the 2 clips.

  1. Disconnect the connector. Remove the map light assembly.


3. REMOVE AMPLIFIER MICROPHONE

  1. E119026
    Disconnect the connector.

  1. E119027
    Disengage the 2 claws and remove the amplifier microphone.

← COMPONENTSINSTALLATION →