INSTALLATION
Removal / installation
| 1. INSTALL AMPLIFIER MICROPHONE |
Engage the 2 claws and install the amplifier microphone.
Connect the connector.
| 2. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof) |
Connect the connector.
Engage the 2 clips and install the map light assembly.
Install the 2 screws.
Engage the 3 claws and close the cover.
| 3. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof) |
Connect the connector.
Engage the 2 clips and install the map light assembly.
Install the 2 screws.
Engage the 3 claws and close the cover.