Lexus IS250 · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination)

  1. B125381E01
    Put protective tape around the front door scuff plate.

  1. Using a moulding remover, disengage the 4 clips.

  1. B125382
    Disengage the 7 claws and remove the front door scuff plate LH.


2. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination)

  1. B125381E01
    Put protective tape around the front door scuff plate.

  1. Using a moulding remover, disengage the 4 clips.

  1. B125382
    Disengage the 7 claws and remove the front door scuff plate LH.

  1. Disconnect the connector.


3. REMOVE FRONT DOOR OPENING TRIM COVER LH

  1. B123347
    Disengage the 6 claws and remove the front door opening trim cover LH.


4. REMOVE SIDE INSTRUMENT PANEL LH

  1. B123348
    Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel LH.


5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

  1. B123350
    Disengage the 7 clips.

  1. Disconnect the connectors and remove the lower instrument panel finish panel sub-assembly.


6. REMOVE SATELLITE SWITCH SET

  1. E119860
    Remove the 3 screws and the finish panel No. 2 retainer with switch.

  1. E119864
    Disengage the 2 claws and remove the satellite switch set from the finish panel No. 2 retainer with switch.

← COMPONENTSINSPECTION →