REMOVAL
Removal / installation
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

| 2. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) |
Disengage the 8 clips.

Disconnect the connectors and remove the console panel sub-assembly.
| 3. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) |
Open the snap.

Disengage the 7 claws and 2 clips, and then remove the rear console panel sub-assembly.

| 4. REMOVE SEAT HEATER SWITCH |
Release the 4 claws and remove the seat heater switch.

