01-E0
Diagnostic trouble codes
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 01-E0 |
"Registration complete" signal from the master device cannot be received. |
- |
| 01-E3 |
The registration demand signal from the slave device is output. Or the registration demand signal is output by receiving connection confirmation signal from the sub-master device. |
- |
| 01-E4 |
The multiple frame transmission is incomplete. |
- |
- HINT:
- Even if no fault is present, this a trouble code may be stored depending on the battery condition or engine start voltage.
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.