Lexus IS250 · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. B123349E01
    Remove the 2 screws <E>.

  1. Push the 2 claws in the direction indicated by the arrow to disengage them.

  1. Remove the No. 1 instrument panel under cover sub-assembly from the guide as shown in the illustration and pull the cover toward the rear of the vehicle.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover sub-assembly.


2. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

  1. E123579
    Remove the No. 1 interior illumination light assembly LH.


3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. B123355
    Using a moulding remover, disengage the 4 clips and remove the No. 2 instrument panel under cover sub-assembly.


4. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

  1. E123580
    Remove the No. 1 interior illumination light assembly RH.

← COMPONENTSINSPECTION →