Lexus IS250 · Service Manual BODY ELECTRICAL

INSPECTION

Inspection


INSPECT FOOTWELL LIGHT

  1. E119974E02
    Disconnect the connector from the footwell light.

  1. Measure the voltage of the connector.

    Standard voltage:
    LH Side: 
    Tester Connection
    		 Condition
    		 Specified Condition
    J19-2 - J19-1
    		 Doors unlock by the transmitter
    		 10 to 14 V
    J19-2 - J19-1
    		 All doors are closed
    		 Below 1 V
    RH Side: 
    Tester Connection
    		 Condition
    		 Specified Condition
    J60-2 - J60-1
    		 Doors unlock by the transmitter
    		 10 to 14 V
    J60-2 - J60-1
    		 All doors are closed
    		 Below 1 V

    If the result is not as specified, repair or replace wire harness or connector.

  1. E119975E02
    Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.

  1. Check that the footwell light comes on.

    OK:
    Comes on

    If the result is not as specified, replace the footwell light.

← REMOVALINSTALLATION →