MAP Disc cannot be Ejected

INSPECTION PROCEDURE

1. CHECK MULTI-DISPLAY

1. Turn the engine switch on (ACC).

2. Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.

   OK:

   The disc is ejected.
   

NG	PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

OK

2. CHECK MAP DISC

1. Check that the map disc is not deformed or cracked.

   OK:

   No deformations or cracks on the map disc.
   

NG	REPLACE MAP DISC

OK
END