INSPECTION
Inspection
| INSPECT CRUISE CONTROL MAIN SWITCH |
Remove the cruise control main switch
Measure the resistance according to the value(s) in the table below.
If the result is not as specified, replace the cruise control main switchStandard resistance Tester Connection
Switch Condition
Specified Condition
A-1(ECC) - A-2(R/N), A-1(ECC) - A-3(CCS)
Neutral
10 kΩ or higher
A-1(ECC) - A-3(CCS)
+ (ACCEL)/RES (RESUME)
216 to 264Ω
A-1(ECC) - A-3(CCS)
- (COAST)/SET
567 to 693Ω
A-1(ECC) - A-3(CCS)
CANCEL
1,386 to 1,694Ω
A-1(ECC) - A-3(CCS)
Main Switch off
10kΩ or higher
A-1(ECC) - A-3(CCS)
Main Switch on
Below 1Ω
A-1(ECC) - A-2(R/N)
Main Switch on and Mode Switch on
Below 1Ω