ON-VEHICLE INSPECTION

Inspection

INSPECT WINDOW GLASS ANTENNA WIRE

1. Check for continuity of the antenna.
   

   HINT:

   Check for continuity at the center of each antenna wire as shown in the illustration.

   NOTICE:

   When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire. Do not use detergents or glass cleaners with abrasive ingredients. When measuring voltage, wrap a piece of tin foil around the tip of the negative probe and press the foil against the wire with your finger, as shown in the illustration.

   OK:

   There is continuity in the antenna.
   

   If the result is not specified, repair the wind glass antenna wire.