ТОПЛИВНЫЙ НАСОС > УСТАНОВКА

1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. INSTALL COWL TOP VENTILATOR LOUVER RH

4. PERFORM INITIALIZATION

5. CHECK FOR FUEL LEAKS

6. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER

7. INSTALL REAR SEAT ASSEMBLY LH (for Power Seat)

8. INSTALL REAR SEAT ASSEMBLY LH (for Ottoman)

9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)