DTC    P1340    Camshaft Position Sensor "A" (Bank 1 Sensor 2)

DESCRIPTION

MONITOR DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK CAMSHAFT POSITION SENSOR (SENSOR POWER SOURCE)

CHECK HARNESS AND CONNECTOR (CAMSHAFT POSITION SENSOR - ECM)

CHECK SENSOR INSTALLATION (CAMSHAFT POSITION SENSOR)

INSPECT CAMSHAFT TIMING PLATE

CHECK VALVE TIMING

REPLACE CAMSHAFT POSITION SENSOR

CHECK WHETHER DTC OUTPUT RECURS (P1340, P1342 AND/OR P1343)

CHECK HARNESS AND CONNECTOR (CAMSHAFT POSITION SENSOR - ECM)