РАДИАТОР > УСТАНОВКА

1. INSTALL RADIATOR SUPPORT LOWER

2. INSTALL RADIATOR SUPPORT CUSHION

3. INSTALL FAN SHROUD WITH FAN AND MOTOR

4. INSTALL RADIATOR ASSEMBLY

5. INSTALL RADIATOR UPPER SUPPORT

6. INSTALL HOOD LOCK ASSEMBLY

7. INSTALL HOOD LOCK CONTROL CABLE COVER

8. INSTALL RADIATOR GRILLE ASSEMBLY

9. INSTALL RADIATOR RESERVOIR ASSEMBLY

10. INSTALL ECM OUTLET DUCT

11. CONNECT OIL COOLER OUTLET HOSE

12. CONNECT OIL COOLER INLET HOSE

13. CONNECT NO. 2 RADIATOR HOSE

14. CONNECT NO. 1 RADIATOR HOSE

15. INSTALL COOL AIR INTAKE DUCT SEAL

16. INSTALL NO. 1 AIR CLEANER INLET

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

18. ADD ENGINE COOLANT

19. INSPECT FOR COOLANT LEAK

20. INSTALL ENGINE ROOM SIDE COVER RH

21. INSTALL ENGINE ROOM SIDE COVER LH

22. INSTALL AIR CLEANER INLET COVER

23. INSTALL V-BANK COVER SUB-ASSEMBLY

24. INSTALL NO. 1 ENGINE UNDER COVER

25. INSTALL COWL TOP VENTILATOR LOUVER RH

26. PERFORM INITIALIZATION