РАСПРЕДВАЛ (для ряда 1) > УСТАНОВКА

1. INSTALL CAMSHAFT BEARING CAP (for Bank 1)

2. INSTALL CAMSHAFT HOUSING SUB-ASSEMBLY (for Bank 1)

3. INSTALL NO. 3 CHAIN TENSIONER ASSEMBLY

4. INSTALL CHAIN SUB-ASSEMBLY (for Bank 1)

5. INSTALL CHAIN TENSIONER SLIPPER (for Bank 1)

6. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY (for Bank 1)

7. INSTALL NO. 1 CHAIN VIBRATION DAMPER (for Bank 1)

8. TIGHTEN CAMSHAFT TIMING GEAR ASSEMBLY

9. CHECK NO. 1 CYLINDER TO TDC / COMPRESSION

10. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY