ГИДРАВЛИЧЕСКИЙ КЛАПАН ИЗМЕНЕНИЯ ФАЗ > УСТАНОВКА

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

3. INSTALL NO. 1 AIR CLEANER INLET

4. INSTALL AIR CLEANER INLET COVER

5. INSTALL V-BANK COVER SUB-ASSEMBLY

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. INSTALL COWL TOP VENTILATOR LOUVER RH

8. PERFORM INITIALIZATION

9. DRIVING TEST