БЛОК ЦИЛИНДРОВ > РАЗБОРКА

1. INSPECT CONNECTING ROD THRUST CLEARANCE

2. INSPECT CONNECTING ROD OIL CLEARANCE

3. REMOVE PISTON AND CONNECTING ROD

4. REMOVE CONNECTING ROD BEARING

5. INSPECT CRANKSHAFT THRUST CLEARANCE

6. REMOVE CRANKSHAFT

7. REMOVE CRANKSHAFT BEARING

8. REMOVE CRANKSHAFT THRUST WASHER SET

9. REMOVE NO. 1 OIL NOZZLE SUB-ASSEMBLY

10. REMOVE PISTON RING SET

11. REMOVE PISTON WITH PIN SUB-ASSEMBLY