| Last Modified: 11-27-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000000PO602KX |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 LX570) | ||
|
Voice Recognition Difficulty |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK CONDITION |
(a) Check if the voice recognition level of the system is low by using only one particular voice.
OK:
Voice recognition level of the system is low with any voice.
|
|
2. |
CHECK MICROPHONE (NAVIGATION CHECK MODE) |
|
(a) Enter the "Mic&Voice Recognition Check" mode
|
(b) When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
(c) Push the recording switch and perform voice recording.
HINT:
The recording limit is 5 seconds.
(d) Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
OK:
All check results are normal.
|
|
|