| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Wiper/Washer | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000011OQ00AX |
| Title: WIPER / WASHER: HEADLIGHT CLEANER ACTUATOR: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
HINT:
Use the same procedures for the RH side and LH side.
(a) Attach the 2 claws.
|
(b) Install the headlight washer actuator sub-assembly with the bolt. Torque: 1.1 N·m (11 kgf·cm, 10 in·lbf) |
|
(c) Connect the headlight washer hose. |
2. INSTALL TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH
|
(a) Attach the 2 claws to install the headlight washer nozzle. |
|
(b) Return the headlight washer nozzle to its original position. |
3. INSTALL TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side
4. INSTALL FRONT BUMPER COVER
5. INSTALL RADIATOR GRILLE
6. INSTALL UPPER RADIATOR SUPPORT SEAL
7. INSTALL ENGINE ROOM SIDE COVER LH
8. INSTALL ENGINE ROOM SIDE COVER RH
9. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
10. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
|
|