| Last Modified: 11-27-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000012FK025X |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 LX570) | ||
|
Illumination for Panel Switch does not Come on with Tail Switch ON |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE) |
|
(a) Enter the "Display Check" mode and select "Vehicle Signal Check Mode"
|
(b) Check that the display changes between ON and OFF according to the light control switch operation.
OK:
|
Light Control Switch |
Display |
|---|---|
|
TAIL or HEAD |
ON |
|
OFF |
OFF |
HINT:
This display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.
|
|
|