| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Automatic Transmission/Transaxle | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000013CK01HX |
| Title: AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(a) Install the spring and check ball body.
|
(b) Insert the pin of the manual valve into the hole of the manual valve lever. |
|
(c) Install the 19 bolts. Torque: 11 N·m (112 kgf·cm, 8 ft·lbf) HINT:
Each bolt length is indicated below. HINT: 36 mm (1.42 in.) for bolt A HINT: 25 mm (0.984 in.) for bolt B HINT: 45 mm (1.77 in.) for bolt C HINT: 50 mm (1.97 in.) for bolt D |
(d) Install the detent spring and detent spring cover with the bolt.
Torque: 10 N·m (102 kgf·cm, 7 ft·lbf)
2. CONNECT TRANSMISSION WIRE
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. ADD AUTOMATIC TRANSMISSION FLUID
(a) Add automatic transmission fluid
.
7. INSTALL OIL PAN PROTECTOR ASSEMBLY
8. INSTALL NO. 2 ENGINE UNDER COVER
|
|