Home › Drivetrain › Automatic Transmission/Transaxle › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Drivetrain Section: Automatic Transmission/Transaxle
Model Year: 2008 Model: LX570 Doc ID: RM0000013CM01HX
Title: AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: REMOVAL (2008 LX570)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

w/ Navigation System:

After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE NO. 2 ENGINE UNDER COVER AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 LX570)+

3. REMOVE OIL PAN PROTECTOR ASSEMBLY AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 LX570)+

4. DRAIN AUTOMATIC TRANSMISSION FLUID AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL (2008 LX570)+

5. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL (2008 LX570)+

6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL (2008 LX570)+

7. DISCONNECT TRANSMISSION WIRE AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL (2008 LX570)+

8. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

(a) Remove the bolt, detent spring cover and detent spring.

(b) Remove the 19 bolts and valve body.

(c) Remove the check ball body and spring.

NOTICE:

Do not drop the check ball body and spring.