|
Last Modified: 11-27-2007 |
1.6 A |
|
Service Category: Audio/Visual/Telematics |
Section: Audio/Video |
|
Model Year: 2008 |
Model: LX570 |
Doc ID: RM0000014T700HX |
|
Title: AUDIO / VIDEO: BACK DOOR SPEAKER: REMOVAL (2008 LX570) |
REMOVAL
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. REMOVE ENGINE ROOM SIDE COVER LH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE CENTER BACK DOOR GARNISH
4. REMOVE BACK DOOR SIDE GARNISH LH
5. REMOVE BACK DOOR SIDE GARNISH RH
6. REMOVE BACK DOOR GARNISH
7. REMOVE REAR HEADER SPEAKER ASSEMBLY
|
(a) Remove the 3 screws.
|
(b) Disconnect the connector and remove the speaker.
NOTICE:
Do not touch the cone part of the speaker.
|