|
Last Modified: 11-27-2007 |
1.6 C |
|
Service Category: Audio/Visual/Telematics |
Section: Navigation/Multi Info Display |
|
Model Year: 2008 |
Model: LX570 |
Doc ID: RM00000182N038X |
|
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: DESCRIPTION (2008 LX570) |
|
DTC
|
01-E0
|
Registration Complete Indication Error
|
|
DTC
|
01-E3
|
Registration Demand Transmission
|
|
DTC
|
01-E4
|
Multiple Frame Incomplete
|
DESCRIPTION
|
DTC Code
|
DTC Detection Condition
|
Trouble Area
|
|
01-E0
|
A "Registration complete" signal from the master device cannot be received.
|
-
|
|
01-E3
|
A registration demand signal from the slave device is output. Or a registration demand signal is output by receiving a connection confirmation signal from the sub-master device.
|
-
|
|
01-E4
|
Multiple frame transmission is incomplete.
|
-
|
HINT:
Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage.
INSPECTION PROCEDURE
HINT:
-
After the inspection is completed, clear the DTCs
.
-
These DTCs do not indicate a malfunction.
|