Home › Drivetrain › Drive Shaft/Propeller Shaft › FRONT PROPELLER SHAFT ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Drivetrain Section: Drive Shaft/Propeller Shaft
Model Year: 2008 Model: LX570 Doc ID: RM0000018QS009X
Title: DRIVE SHAFT / PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 LX570)+

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 LX570)+

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 LX570)+

4. REMOVE NO. 2 ENGINE UNDER COVER AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 LX570)+

5. REMOVE PROPELLER SHAFT HEAT INSULATOR

(a) Remove the 2 bolts and insulator.

6. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

(a) for Transfer Side:

(1) Place matchmarks on the propeller shaft flange and transfer flange.

(2) Remove the 4 nuts and 4 washers.

(b) for Differential Side:

(1) Place matchmarks on the propeller shaft flange and differential flange.

(2) Remove the 4 nuts and 4 washers.

(c) Remove the front propeller shaft.