Home › Brake › Brake Control/Dynamic Control System › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH
Last Modified: 11-27-2007 1.6 A
Service Category: Brake Section: Brake Control/Dynamic Control System
Model Year: 2008 Model: LX570 Doc ID: RM000001WZ200BX
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 LX570)+

2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

3. REMOVE COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

4. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

5. REMOVE VSC OFF SWITCH

(a) Disconnect the VSC OFF switch connector.

(b) Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel.

HINT:

Tape the screwdriver tip before use.