|
Last Modified: 11-27-2007 |
1.6 A |
|
Service Category: Brake |
Section: Parking Brake |
|
Model Year: 2008 |
Model: LX570 |
Doc ID: RM000002JL2005X |
|
Title: PARKING BRAKE: PARKING BRAKE LEVER: REMOVAL (2008 LX570) |
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH (w/ Cool Box)
2. REMOVE ENGINE ROOM SIDE COVER RH (w/ Cool Box)
3. REMOVE UPPER RADIATOR SUPPORT SEAL (w/ Cool Box)
4. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Cool Box)
5. REMOVE FRONT SEAT ASSEMBLY LH (w/ Cool Box)
(a) Remove the front seat assembly LH
.
6. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(a) Remove the rear console box sub-assembly
.
7. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)
(a) Remove the cooling box assembly
.
8. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
(a) Release the parking brake lever.
(b) Disconnect the parking brake switch connector.
|
(c) Remove the adjusting nut.
|
|
(d) Remove the parking brake return spring.
|
(e) Disconnect the No. 2 parking brake cable and No. 3 parking brake cable from the No. 1 parking brake pull rod.
(f) Remove the No. 1 parking brake pull rod, bush and compression spring from the parking brake lever.
(g) Remove the straight pin from the parking brake lever.
|
(h) Remove the 4 bolts and parking brake lever.
|
9. REMOVE PARKING BRAKE SWITCH ASSEMBLY
(a) Remove the screw and parking brake switch.
|