Home › Vehicle Interior › Seat Belt › FRONT SEAT INNER BELT ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Seat Belt
Model Year: 2008 Model: LX570 Doc ID: RM000002LIX00FX
Title: SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY



(a) Install the front seat inner belt assembly with the nut.

Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

(b) Connect the 3 connectors and attach the clamps.

2. INSTALL FRONT SEAT ASSEMBLY

(a) Install the front seat assembly SEAT: FRONT SEAT ASSEMBLY: INSTALLATION (2008 LX570) .

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

4. CHECK SRS WARNING LIGHT SEAT: FRONT SEAT ASSEMBLY: INSTALLATION (2008 LX570)+

5. INSPECT FRONT SEAT ASSEMBLY SEAT: FRONT SEAT ASSEMBLY: INSTALLATION (2008 LX570)+